Need help?Do you have a question about the Tenma 72-2540 and is the answer not in the manual?
General| Output Current | 0-5A |
|---|---|
| Power Rating | 150W |
| Display | LED |
| Type | Linear |
| Voltage Resolution | 10mV |
| Current Resolution | 1mA |
| Cooling | Fan |
| Frequency | 50/60 Hz |
| Protections | Overvoltage |
| Output Voltage | 0-30V DC |
| Ripple Voltage | < 1mVrms |
| Load Regulation | ≤0.01% + 3mV |
| Line Regulation | ≤0.01% + 3mV |
Explains safety symbols, AC input voltage, and operating/storage environmental conditions.
Details fuse types and ratings for different voltage configurations.
Describes device performance aspects like low noise and compact size, plus general operation features.
Outlines key operational functions, protections, and connectivity options like USB/RS232.
Explains the front panel display elements and status indicators like OVP, OCP, CV, CC.
Details the indication for saving and recalling panel settings (M1-M5).
Guides on using memory functions and adjusting voltage/current settings via the control knob.
Instructions for connecting the AC power cord and operating the main power switch.
Instructions for controlling output ON/OFF and enabling/disabling beep sounds.
Details how to lock the front panel and save panel settings to internal memory.
How to recall previously saved panel settings from internal memories.
Setup, functionality check, and entering/exiting remote control modes via USB/RS232.
Detailed command syntax and examples for setting voltage, current, beep, output, and status.
Details physical dimensions, weight, interface types, and accessories.
Guidance on WEEE disposal and important legal notices regarding the data sheet.
To Next Page
