Tenma 72-7715 - User Manual

P/N:
Digital
Thermometers
72-7715
72-7712

Summary

Safety Information

Using the Thermometer

Changing Setup Options

Access and modify various device settings including logging, thermocouple type, alarms, time, and more.

Entering and Exiting Setup

Changing the Logging Interval

Configure the frequency at which the thermometer logs readings into memory.

Changing the Thermocouple Type

Changing the Offset (T1)

Adjust the temperature reading for probe T1 to compensate for specific thermocouple errors.

Changing the Offset (T2)

Adjust the temperature reading for probe T2 to compensate for specific thermocouple errors.

Setting the Low Limit Alarm (Lo)

Setting the High Limit Alarm (Hi)

Enabling or Disabling Over Limit Signal Output

Enabling or Disabling Normal Temperature Compensation (NTC)

Configure the Normal Temperature Compensation (NTC) feature for specific measurement scenarios.

Measuring Temperatures

Connecting a Thermocouple

Using the Offset to Adjust for Probe Errors

Over Limit Alarm (Only 72-7715)

Over Limit Signal Output (Only 72-7715)

Tenma 72-7715 Specifications

General

Type	Digital Multimeter
Display Type	LCD
Temperature Range	-20°C to 1000°C
Continuity Check	Yes
Diode Test	Yes
Battery	9V
DC Current Range	200µA to 10A