Need help?Do you have a question about the Tenma 72-2985 and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Display Type | LCD |
| Resistance Range | 200Ω to 20MΩ |
| Temperature Range | -20°C to 1000°C |
| Continuity Check | Yes |
| Diode Test | Yes |
| Battery Type | 9V |
| Safety Rating | CAT II 600V |
| DC Current Range | 200µA to 10A |
| AC Current Range | 200µA to 10A |
| Capacitance Range | 20nF to 200µF |
| Frequency Range | 10Hz to 10MHz |
Details on the clamp meter's physical parts, indicators, and operational buttons.
Procedure for measuring AC and DC voltages using the meter.
Steps for performing resistance, continuity, diode, and capacitance tests.
How to measure AC and DC current using the clamp meter.
Detecting AC voltage and electric fields without physical contact.
Covers backlight, auto power-off, and buzzer alerts.
Details for circuit continuity, diode testing, and overload protection.
Procedure and specifications for capacitance measurement.
Methodology and specifications for DC current measurement.
Methodology, specifications, and accuracy for AC current measurement.
Instructions for replacing the meter's batteries.
To Next Page
