Need help?Do you have a question about the Tenma 72-942 and is the answer not in the manual?
Protects microphone from wind noise over 10m/sec.
Selects A or C weighting for general or low-frequency noise.
Selects Fast or Slow response for noise measurement.
Selects measurement range between 30-100dB (Lo) or 60-130dB (Hi).
Measures and holds the maximum sound level, or freezes current reading.
½ inch Electret Condenser microphone.
Instructions for replacing the 9V battery.
How to clean the device casing safely.
Protects microphone from wind noise over 10m/sec.
Selects A or C weighting for general or low-frequency noise.
Selects Fast or Slow response for noise measurement.
Selects measurement range between 30-100dB (Lo) or 60-130dB (Hi).
Measures and holds the maximum sound level, or freezes current reading.
½ inch Electret Condenser microphone.
Instructions for replacing the 9V battery.
How to clean the device casing safely.
General| Display Type | LCD |
|---|---|
| Display Count | 2000 |
| Continuity Check | Yes |
| Diode Test | Yes |
| Battery | 9V |
| Temperature Measurement | No |
| Type | Digital Multimeter |
| DC Current Range | 200µA to 10A |
| Operating Temperature | 0°C to 40°C |
To Next Page
