Tenma 72-9375 - Voltage Measurement Procedures; AC Voltage Measurement

Measurement Operation
8
µF, nF F:
µF:
nF:
Farad (unit of capacitance)
Microfarad. 1 x 10
-6
or
0.000001 farads.
Nanofarad. 1 x 10
-9
or
0.000000001 farads.
Hz, kHz,
MHz
Hz:
kHz:
MHz:
Hertz (The unit of frequency
in cycles/second.
Kilohertz. 1 x 10
3
or 1,000
hertz.
Megahertz. 1 x 10
6
or1,000,000 hertz.
V, mV V:
mV:
Volts (unit of voltage)
Millivolt (1 x 10
-3
or 0.001
volts)
A, mA,
µA
A:
mA:
µA:
Amperes (amps). The unit
of current.
Milliamp. 1 x 10
-3
or 0.001
amperes.
Microamp. 1 x 10
-6
or
0.000001 amperes.
A. AC & DC Voltage Measurement (see figure 3)
Warning
To avoid personal injury or damages to the Meter
from electric shock, please do not attempt to
measure voltages higher than 1000VDC / 750VAC
RMS although readings may be obtained.
72-9375: OPERATING MANUAL