18
Temperature (Fahrenheit)
Range Resolution Accuracy Overload Protection
-40
o
F~32
o
F
0.1
o
F
± (4%+50)
1000V
32
o
F~752
o
F
± (1.5%+50)
752
o
F~1832
o
F
± (3%)
Included is a K-Type (nickel chromium ~ nickel silicon) point contact temperature probe
which could only measure temperature below 230
o
C .
If you want to measure temperature higher than 230
o
C, you must use the rod contact
temperature probe.
4~20mA Loop Current
Range Resolution Accuracy Overload Protection
(4~20mA) % 0.01% ± (1%+50)
0.5A,1000V, fast type
fuse, Ø10.3×38mm
When the readings obtained is:
• < 4mA, the primary display shows LO
• 4mA, the primary display shows 0%....
• 20mA, the primary display shows 100%
• > 20mA, the primary display shows HI
Power Measurement
Range Resolution Accuracy
Current Overload
Protection
Voltage Overload
Protection
2500W 0.1W ± (2%+10)
10A, 1000V fast type
fuse Ø6.3 x 32mm
1000V
• Power factor input range: 0.00~1.00
• Voltage input impedance: around 10M
Ω
• Voltage input range: AC50~250V
CLEANING
• Periodically wipe the case with damp cloth and mild detergent. Do not use
abrasives or solvents for cleaning.
• Clean the measurement probe tips occasionally, as dirt on the probes can affect
reading accuracy.
To Next Page
