Tenmars TM-195 - Introduction to the RF Field Strength Meter; Simple Operation Guide; Basic Operation Controls; Fundamentals of Electromagnetic Fields

1 Introduction
This meter is designed for measuring and monitoring Radio–
Frequency electromagnetic field strength. The meter is
calibrated precisely over the frequency range of 50Mz~3.5
GHZ.
2 Simple a method of operation
Press button to power on. To change measuring unit
(mV/m), push “ ”button to change the unit.Electric field
strength (V/m).Computed magnetic field strength (mA /m).
Computed power density (mW/m
2
).Computed power density
(μW/cm
2
).
Press this key to change sensor axis selector :”All axis” →
“X axis “→ “Y axis” → “Z axis”.
3 Fundamentals
Electromagnetic pollution:
EN-1