5
TENMARS
TM-196
Application
• Quite often routine, maintenance and
service work has to be done
in
areas
where active electromagnetic fields are
present, e.g.
in
broadcasting stations,
et
c.
Additionally, other employees may
b
eexposed
to electromagnetic radia
ti
on
.
In
such cases, it
is
essential that
personnel
be
not exposed to dangerous
levels
of
electromagnetic radiation, such
as:
• High frequency (RF) electromagnetic
wave field strength measurement.
• Mobile phone base station antenna
rad
ia
ti
on power density measurement.
• Wire
le
ss communication applications
(CW, TDMA, GSM, DECT).
• RF power measurement for transmitters.
~
Wireless
LAN
(Wi-Fi) detection,
installation.
• Spy camera, wireless bug finder.
• Cellular /Cordless phone radiation safety
leve
l.
• Microwave oven leakage detection.
• Personalliving environment EMF safety.
EN-5
TENMARS
TM-196
6 Features
• The meter
is
a broadband device for
monitoring high- frequency radiation
in
the range from1
OMHz
to 8GHz
• The non-directional electric
fi
e
ld
antenna and high sensitivity also allow
measurements
of
electric field strength
in
TEM cells and absorber rooms.
• The unit
of
measurement and the
measurement types have been selected
to expressed
in
units
of
electrical and
magnetic field strength and power
density.
• At high frequencies, the power density is
of
particular significance. It provides a
measure
of
the power absorb
ed
by a
person exposed to the fiel
d.
This power
level must be kept as low as possible at
high frequencies.
• The meter can
be
set to display the
instantaneous value, the maximum
value measured or the average value.
Instantaneous and maximum value
measurements are useful for orientatio
n,
e.g. when first entering an exposed
area.
EN-6
To Next Page
