TM-6002
EN-3
1. Features
1. The Battery Tester is designed for measuring the internal impedance
and open circuit voltage of the secondary battery including Nickel-metal
hydride battery ( NiMH),Nickel-cadmium battery(NiCd),Lithium-ion
battery(Li-ion), Alkaline battery and lead-Acid battery.
2. AC four-terminal method to measure the internal impedance by
eliminating lead impedance and contact impedance to get the accurate
results.
3. Multi-display to show the internal impedance, voltage and clock of the
battery simultaneously.
4. It has 99 sets of composite comparator function, which can be set at
impedance and voltage values to get the reliable detection of battery
deterioration.
5. Pin type leads, which can easily contact the battery electrodes supplied
as standard to get more accurate 4-terminal measurement.
.
2. SPECIFICATIONS
4-1.General specifications
Measuring method：Impedance (AC four-terminal method).
A/D conversion: Dual slope method.
Display：LCD display and LEDs (comparator output).
Sampling rate:2 Second.
Open-Circuit terminal voltage: 7.0Vp-p max.
Input over range: the screen displays“OL”.
Low battery detection: the screen displays “ ”.
Auto power off: The meter will turn off automatically after about 15 minutes of
inactivity, allows user to set the inactive time (01〜99 minutes).
Comparator settings: High and Low limits of the comparators impedance and
voltage.
Number of comparator settings: 99 sets.
Manual and auto continuous Data logging: 9999 sets.
To Next Page
Loading...