TM-6002
EN-8
Voltage Measurements
Temperature coefficient ：(±0.1％ rdg ±0.5digits)/℃
CAUTION
The maximum input for DC voltage is 40V(No AC voltage
Input permitted). Do not attempt to measure high voltages to
avoid electrical shocks or damages to the instrument.。
Range Resolution Accuracy
4V
1mV
40V
10mV
±(0.1％ reading ＋6digits)
Temperature measurement
Measurement Range Resolution
Accuracy
-20℃〜60℃
-4℉〜140℉
0.1℃
0.1℉
±1.0℃
±1.8℉
DC Current (DCA) measurement
CAUTION
The maximum input for DC current is 700A. Do not
attempt to measure higher currents to avoid electrical
shocks or damages to the instrument.
Range Sensitivity Resolution Accuracy
700A
0.6A〜700.0A
0.1A
±(2.0％ reading ＋5digits)
5. Safety Precaution
CAUTION
Take extreme care for the following conditions while
measuring.
1. Measuring voltage over 20V as it may cause human body electricity
conduction.
2. Do not measure voltage, current under humid or wet environment. If any
unusual condition of test leads’ send
3. (Metal part). And attachment of the meter, such as breakage, deformation,
fracture, foreign substance, No display, etc., do not conduct any measuring.
4. Do not contact any exposed metal (conductive) parts, such as end of test
lead, jack, fixing object, circuit etc,.
5. Keep you insulated from the object waiting for measuring.
6. Do not operate the meter under the environment with explosive gas
To Next Page
Loading...