Need help?Do you have a question about the Tenmars TM-6002 and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Overload Indication | Yes |
| Battery | 9V battery |
| Resolution | 0.01 µT |
| Frequency Response/Range | 30 to 300 Hz |
| Sample Rate/Sampling Time | 2.5 times per second |
| Operating Humidity | Below 80% RH |
| Sensor | Hall Effect Sensor |
Covers measuring method, A/D conversion, display, sampling rate, and data logging.
Identifies all buttons, ports, and display elements on the TM-6002 tester.
Details accuracy, current, and resolution for resistance measurements.
Details accuracy, resolution, and temperature coefficient for voltage.
Details accuracy, sensitivity, and resolution for DC current.
Essential advice on electrical safety, handling, and avoiding measurement errors.
Precautions for operating environment, static electricity, and contamination.
Step-by-step instructions for safely replacing the batteries in the TM-6002.
How to use the data hold and activate the screen backlight.
Using automatic hold and data recording functionalities.
Steps for manual logging, viewing, and clearing data memory.
Configuring the automatic shutdown timer for the device.
Minimum system requirements for installing the TM-6002 software.
Detailed instructions to install the software and USB driver on a PC.
To Next Page