Need help?Do you have a question about the Tennsmith 36 and is the answer not in the manual?
Shearing Capacity| maximum shearing capacity, mild steel | 16 gauge / 1.6 mm |
|---|---|
| maximum shearing capacity, stainless steel | 20 gauge / 1.0 mm |
Dimensions| maximum cutting length | 52-1/4 in. / 1327 mm |
|---|---|
| back gauge range | 30 in. / 762 mm |
| front gauge range | 37 in. / 940 mm |
| floor space, gauges in position | 45 x 80 in. / 1143 x 2032 mm |
| overall dimensions, less gauges, LxWxH | 46-1/4 x 24 x 42 in. / 1181 x 686 x 1067 mm |
Weight| shipping weight | 700 lbs. / 317.5 kg |
|---|
Shearing Capacity| maximum shearing capacity, mild steel | 16 gauge / 1.6 mm |
|---|---|
| maximum shearing capacity, stainless steel | 20 gauge / 1.0 mm |
Dimensions| maximum cutting length | 52-1/4 in. / 1327 mm |
|---|---|
| back gauge range | 30 in. / 762 mm |
| front gauge range | 37 in. / 940 mm |
| floor space, gauges in position | 60 x 80 in. / 1524 x 2032 mm |
| overall dimensions, less gauges, LxWxH | 61 x 25 x 42 in. / 1550 x 915 x 1067 mm |
Weight| shipping weight | 950 lbs. / 431 kg |
|---|
Outlines the terms and conditions of the manufacturer's 3-year warranty for machinery and parts.
Specific procedure for setting the rake angle on the TENNSMITH Model 36 shear.
Specific procedure for setting the rake angle on the TENNSMITH Model 52 shear.
Chart detailing the shear's capacity for various materials and gauges.
To Next Page
