TENSITRON ACM-100 - 7 Appendices; Appendix 1: RISER USAGE CHARTS; Appendix 2: BLANK CALIBRATION CHARTS; Acm-100

ACM Series Instrument www.tensitron.com pg. 12
7. APPENDICES
 Appendix 1: RISER USAGE CHARTS
Note: ACM-150-CWT was formerly known as CWT-150, and ACM-300-CWT was
formerly known as CWT-300.
 Appendix 2: BLANK CALIBRATION CHARTS
o ACM-100
DIAMETER 1/16" 3/32" 1/8" 5/32" 3/16" 1/4"
ACM-100 1/16 3/32 1/8 5/32
ACM-200 1 2 2 3 3 4
ACM-300 1 2 3 4
ACM-400 1 2 3 3
ACM-600
A B C D
DIAMETER 5 10 15 20 25
ACM-150-CWT
5 10 15 20 20
ACM-300-CWT
10 15 20 20
MODEL #
MODEL #
RISER USAGE & CABLE DIAMETER - Inch
RISER USAGE & CABLE DIAMETER - Carat Weight (CWT)
Use Riser #:
Use Riser #:
ACM-100
Serial No.
If Cable Size is:
1/16" 3/32" 1/8" 5/32"
USE
RISER 1/16 RISER 3/32 RISER 1/8 RISER 5/32
CABLE TENSION
LBS =
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
TENSITRON, INC.
CAL. BY: _________________________
733 S. Bowen St., Longmont, CO 80501
Date: See Cal Sticker
TEL: (303) 702-1980 FAX: (303) 702-1982