TENSITRON ACM-100 - 3 Safety; 4 Instrument Details; Standard Instruments, Cable Diameters, Accuracy

ACM Series Instrument www.tensitron.com pg. 5
3. SAFETY
READ AND SAVE ALL INSTRUCTIONS FOR FUTURE USE. Before use,
ensure all users read and understand this manual, as well as any labels
packaged with or attached to the instrument.
 Know your instrument. Read this manual carefully to learn your tension
meter’s applications and limitations, as well as the potential hazards
associated with this type of instrument.
 Use the right tool or instrument. Do not use this instrument to do a job for
which it is not recommended.
 Check for damaged parts. Inspect instrument before use. Check for any
binding of moving parts, improper mountings, broken parts and any other
condition that may affect operation. Do not use a damaged instrument.
Tag damaged instrument “DO NOT USE” until repaired.
 Maintain instrument carefully. Keep handles dry, clean and free from oil
and grease. Do not lubricate. All roller bearings are sealed.
 Do not use instrument if it has received a sharp blow, been dropped or
damaged in any way. Do not disassemble. Incorrect reassembly may
damage the instrument.
 If instrument is damaged return it to Tensitron for repair.
4. INSTRUMENT DETAILS
 Standard Instruments, cable diameters, accuracy
Model #
Cable Selection
Full Scale
Accuracy
(+/-)
Total error
allowed (+/-)
ACM-100
1/16”, 3/32”, 1/8”, 5/32”
4%
4 lbs.
ACM-200
1/16”, 3/32”, 1/8”, 5/32”, 3/16”, 1/4”
4%
8 lbs.
ACM-300
3/32”, 1/8”, 3/16”, 1/4”
6%
18 lbs.
ACM-400
3/32”, 1/8”, 5/32”, 3/16”
6%
24 lbs.
ACM-600
1/8”, 5/32”, 3/16”, 1/4”
8%
48 lbs.
ACM-150-CWT
(formerly CWT-150)
5, 10, 15, 20 & 25 CWT cables
4%
6 lbs.
ACM-300-CWT
(formerly CWT-300)
10, 15, 20 & 25 CWT cables
6%
18 lbs.