▪ Before riding, check whether the screws in the following key parts
are properly tightened:
1. Screws between the stem and the front fork stem
2. Screws between the stem and the handlebar
3. Screws between the brake lever and the handlebar
4. Screws between the brake clamps and frame or front fork
5. Screws between the discs and bottom brackets
▪ Use the tools provided to tighten loose screws.
▪ Before the first ride, make sure that all screws are properly tightened.
When the riding distance reaches 200 km for the first time, verify
that the screws maintain the same fastening performance. After the
initial 200 km, check the fastening performance once every 500 km
of riding distance.
▪ If you often ride in complex road conditions, we recommend that
you check the fastening performance of screws once every 300 km
of riding distance.
Daily inspections
03.
ROUTINE MAINTENANCE
050 Bike usage
To Next Page
Loading...
