Professional store maintenance
We recommend that you go to a professional store for maintenance 2-3
times a quarter, or after every 1,000 km of riding distance. The following
items should be checked during such maintenance:
▪ The performance of the hydraulic brakes
▪ The fastening performance of screws in key parts, especially those
between the discs and bottom brackets
▪ The wear degree of the front fork parts
▪ The wear degree of the front hub bearings
▪ The wear degree of the pedal pivots
▪ The smoothness of pivots in the freewheel, front fork parts, front hub
bearings, bottom bracket, pedals, and other parts
▪ The wear degree of the tires
▪ The fastening condition of the battery, controller, motor, odometer, and
other electronic control parts
▪ This e-bike is designed for urban riding and cargo transportation. Do not
use it for mountain biking or other non-urban application scenarios. It is
important to understand your e-bike and its intended use. Personal
safety incidents may occur when you use your e-bike in the wrong
application scenarios.
▪ Inspection and maintenance is very important for the safety and
service life of your e-bike.
You should regularly check the brakes,
tires, handlebar, and rims. Any unmaintained parts may break or
perform poorly, possibly causing life-threatening accidents.
▪ Your e-bike must comply with legal regulations for riding on public
roads in all conditions, including inclement weather, at night, early
morning or dusk. It is your responsibility to familiarize yourself with
and comply with all applicable laws in your country, including properly
equipping you and your e-bike as required by law.
▪ Improper fitting, installation, operation, or maintenance of any accessories
or parts may cause serious personal injuries or even death. Do not
modify the frame or original components in any way. Modifications
may cause damage to your e-bike or lead to life-threatening
accidents. Mismatched accessories or incorrect installation can
affect product performance and make riding unsafe.
▪ Like all mechanical products, e-bikes are subject to wear and stress.
Different materials and components may react to wear or stress
fatigue in different ways. Make sure you have spare parts ready for tires,
brake blocks, and other fragile parts. If the lifetime of a component has
been exceeded, it may suddenly fail, causing injuries to the rider. Any
cracks, scratches or color changes indicate that the life of a component
has been reached and it should be replaced.
▪ Extra caution should be exercised when you install any third-party
accessories on your e-bike. Select third-party accessories in accordance
with regulations. Improper use or installation may cause damage and
life-threatening accidents.
▪ Do not touch the brake discs while the front and rear wheels are
turning, or immediately after you use the brakes. You may be injured
or burned.
054 Bike usage
03.
ROUTINE MAINTENANCE
To Next Page
Loading...
