Do you have a question about the Tera Gear PC22B and is the answer not in the manual?
Align and attach lid hook, lid, vent, and handle using bolts and washers, then tighten.
Attach name plate to lid using M5 bolts, washers, and nuts.
Attach handle to bowl insulator cushion and bottom bowl with bolts and washers.
Assemble wheels, axles, and legs to the bottom grid and bowl using bolts and nuts.
Install vent into ash receiver, attach vent handle retainer and handle with nuts.
Slide ash assembly into the guide underneath the bottom bowl.
Place charcoal grid and cooking grid into the bottom bowl.