3
• Test the power cable polarity with ONLY the power cable connected to Ace.
CAUTION:
Using a reverse polarity or improperly−constructed power cable can damage the
product and is not covered under warranty.
• Check the power cable for shorts and proper grounding.
• Do not connect video cables.
CUSTOM/THIRD PARTY CABLES
BOLT MANAGER
• SELECT REGION - Configure Ace 500 to comply with your region’s regulations governing use of
the 5GHz spectrum.
Bolt Manager allows you to configure, pair, and upgrade the Ace system. Bolt Manager is available as
software for Mac and Windows at www.teradek.com/pages/downloads, or for purchase as a standalone
device.
The following configuration settings are available:
• SELECT TX NAME (TRANSMITTER ONLY) - Modify the transmitter’s name to make it easier to
identify among other systems that are present.
To Next Page
Loading...
