Teradek SERVPRO User Manual

2
Connect the HDMI or SDI output from your video source to Serv Pro’s input connector (I or J).
Connect power to Serv Pro using the included A/C adapter.
1
2
POWER AND CONNECT
3
Turn the Power switch on the back (N) to the ON position.
a. Access Point (AP) Mode - Connect your device to Serv Pro’s WiFi network:
Serv-Pro- XXXXX (XXXXX is the last ve digits of Serv Pro’s serial number).
Connect via Ethernet
Connect to a WiFi Network (AP Mode)
b. Client Mode - Select Client, tap Scan for Networks, then enter your credentials for the
network you select.
You can use the front panel interface or the built-in web UI to control and congure Serv Pro to
connect to a network. Choose one of the following options to get Serv Pro online.
GET ONLINE
Navigate to the Network Setup menu and select a WiFi mode:
Plug an Ethernet cable into Serv Pro’s 10/100/1000 Ethernet port and connect it to an Ethernet
switch or router.

Teradek SERVPRO Specifications

General

Brand	Teradek
Model	SERVPRO
Category	TV Tuner
Language	English