Teraoka DS-650E - Internal Count & A;D Count Display; Tax Setting

DS650E SERVICE MANUAL
4.4.2. Specification Enter (142)
NOTE: It can work only when SPAN SWITCH is on (Enable).
1 - ZERO 2 - NET 3 - MEMORY 4 - BATTERY
OPERATION WEIGHT U.PRICE T.PRICE 1 2 3 4 REMARKS
0.0 0 0 0. 0 0 0.0 0 Weighing mode.
[RE-ZERO] 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 Enter 1 4 2 while depressing
[RE-ZERO] + [1] [4] [2] S P C 0 8 0 0 0 0 0 0 0 0 RE-ZERO.
[+] S P C 0 9 0 0 0 0 0 0 0 0 + key only increase Specification.
[+] S P C 1 0 0 0 0 0 0 0 0 0 + key only increase Specification.
[1] [0] [1] [1] S P C 1 0 0 0 0 0 1 0 1 1 Only 1 & 0 are enable.
[*] S P C 1 1 0 0 0 0 0 0 0 0 * key to store Specification.
[-] S P C 1 0 1 0 1 1 0 0 0 0 - key only decrease Specification.
[+] S P C 1 1 0 0 0 0 0 0 0 0
[1] [1] [1] [1] S P C 1 1 0 0 0 0 1 1 1 1
[C] S P C 1 1 0 0 0 0 0 0 0 0
[1] [0] [1] [0] S P C 1 1 0 0 0 0 1 0 1 0
[*] S P C 1 2 0 0 0 0 0 0 0 0 * key to store Specification.
[+] S P C 1 3 0 0 0 0 0 0 0 0
[T] 0.0 0 0 0.0 0 0.0 0 Store SPECS to EEPROM & Escape to
Weighing mode.
4.5. Internal Count & A/D Count Display
1 - ZERO 2 - NET 3 - MEMORY 4 - BATTERY
OPERATION WEIGHT U.PRICE T.PRICE 1 2 3 4 REMARKS
[RE-ZERO] 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 Enter 0 0 9 while depressing
[RE-ZERO] + [0] [0] [9] 1 1 8 9 9 2 0 RE-ZERO.
Weight and Unit Price column display A/D
Count, Total Price column Display Internal
Count.
[T] 0.0 0 0 0.0 0 0.0 0 T key to go back Weighing mode.
4.6. Tax Setting
(Available when SPEC21.BIT2 = 0)
1 - ZERO 2 - NET 3 - MEMORY 4 - BATTERY
OPERATION WEIGHT U.PRICE T.PRICE 1 2 3 4 REMARKS
0.0 0 0 0.0 0 0.0 0
Weighing mode.
[RE-ZERO] 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 Enter 9 9 9 while pressing
[RE-ZERO] + [9] [9] [9] t A 0.0 0 0.0 0 RE-ZERO.
[3] [0] [0] t A 0.0 0 3.0 0 Enter Tax Rate, e.g. 3.00%.
[RE-ZERO] r d 4 5 3.0 0 0.0 0 RE-ZERO to store specification.
[C] C U t O F 3.0 0 0.0 0 Depress ‘C’ to select Cut Off