12. 13.
FAILURE TO OBEY THE FOLLOWING
WILL RESULT IN
For stationary operation, vehicle must be securely
parked, driveline disengaged, and Digger Derrick
properly stabilized prior to operation.
To avoid tip-over, all outriggers must be properly
extended on a solid level surface.
Operate all controls slowly and smoothly and
make sure controls are returned to neutral
after desired operation.
Keep load under boom tip. Do not side load boom
or drag loads. Avoid free swinging loads.
Never move the vehicle until the booms, auger and
outriggers are in properly stowed postion and secured.
Refer to the operator's manual for complete
instructions. If missing, replace manual.
Never operate the machine with personnel under
boom or load.
Keep at least 4 wraps of loadline on winch drum.
on structures with energized lines or components.
Top Controls are required when working from platform
To Next Page
Loading...
Need help?
General
