24.
25.
498819
OVERTURNING HAZARD
May result from overturning machine
If the truck is not level the capacity is reduced
Lift capacity is determined in a level position
of the truck.
For material handling, lifting operations
For lifting people, in a boom tip platform, the
Working on slopes that exceed 5 degrees
may result in truck tipping over.
This unit has been tested for stability on a
maximum slope of 5-degrees.
the Digger Derrick must be level.
truck must be at less than a 5 degree slope.
DEATH OR SERIOUS INJURY
To Next Page
Loading...
Need help?
General
