Note:
Safety signs are designed and fitted to the product to warn of possible dangers,
and MUST be replaced immediately if they become unreadable or lost. If the
product is repaired and parts have been replaced on which safety signs were
fixed, be sure new safety signs are fitted before the product is put into service.
Key (continued)
10. Burn hazard (engine compartment)
11. Belt/fan entanglement hazard (engine compartment)
12. Skin (oil) injection hazard (outside of cab)
13. Crush hazard (lift arm brace)
14. Crush Hazard (Lift arms)
15. Fall hazard / rollover Hazard / read operator’s manual (inside cab)
16. Crush / fall hazards (inside cab)
17. Crush (run over) hazard
18. Tie down location
19. Explosion / burn hazard (read operator’s manual)
2 SAFETY
13
To Next Page
Loading...
Need help?
General
