8-98-9
Steering, Braking and Body Hoist Systems -Steering, Braking and Body Hoist Systems -
Check for correct operation ofCheck for correct operation of
all systems before operating the truck.all systems before operating the truck.
Steering Filter -Steering Filter -Check steering filter restriction warning light with the truckCheck steering filter restriction warning light with the truck
empty, brakes released, oil at normal operating temperature, engine operating atempty, brakes released, oil at normal operating temperature, engine operating at
1 500 rev/min and while turning the steering wheel at one turn/sec. If the warning1 500 rev/min and while turning the steering wheel at one turn/sec. If the warning
light illuminates, the filter element should be light illuminates, the filter element should be replaced.replaced.
Rear Disc Brake Filter(s) -Rear Disc Brake Filter(s) -
Replace element(s) when indicator shows oil at the replace element level.Replace element(s) when indicator shows oil at the replace element level.
AFTER FIRST 150 HOURS OF OPERATING NEW OR REBUILTAFTER FIRST 150 HOURS OF OPERATING NEW OR REBUILT
COMPONENTSCOMPONENTS
Transmission -Transmission -Drain oil, replace filters and refill.Drain oil, replace filters and refill.
Differential -Differential -Drain oil and refill.Drain oil and refill.
Planetaries -Planetaries -
Drain oil and refill.Drain oil and refill.
EVERY 250 HOURS OF OPERATIONEVERY 250 HOURS OF OPERATION
Oil Can Points -Oil Can Points - Oil accelerator linkage, hinges, and other working parts withOil accelerator linkage, hinges, and other working parts with
engine oil.engine oil.
Coolant Additive -Coolant Additive -Check and replenish DCA4 concentration as Check and replenish DCA4 concentration as described indescribed in
Section 210-0000, COOLING SYSTEM, in the Maintenance Manual.Section 210-0000, COOLING SYSTEM, in the Maintenance Manual.
Coolant Filter(s) -Coolant Filter(s) -
Replace coolant filter(s) if required. When testing the DCA4Replace coolant filter(s) if required. When testing the DCA4
concentration, depending on the level of DCA4, the coolant concentration, depending on the level of DCA4, the coolant filter(s) may notfilter(s) may not
necessarily have to be necessarily have to be changed. Refer to Section 210-0010, COOLINGchanged. Refer to Section 210-0010, COOLING
SYSTEM, in the Maintenance Manual.SYSTEM, in the Maintenance Manual.
Cooling Fan -Cooling Fan -Visually check the fan for cracks, loose rivets, and bent or looseVisually check the fan for cracks, loose rivets, and bent or loose
blades. Check fan mounting and tighten if required. Replace any fan that isblades. Check fan mounting and tighten if required. Replace any fan that is
damaged.damaged.