EasyManua.ls Logo

Terex TSV-70 User Manual

Terex TSV-70
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
TSV-70/80
Operation and Maintenance Manual
Skid Steer Loader
Version: EN
Edition: 2012-10
Part Number: 7005-995 (US/ROW)
Valid From Serial No: 00101 (TSV 70)
00101 (TSV 80)
Original Instructions

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Terex TSV-70 and is the answer not in the manual?

Terex TSV-70 Specifications

General IconGeneral
BrandTerex
ModelTSV-70
CategoryCompact Loader
LanguageEnglish

Summary

1 INTRODUCTION

1.3 Safety Alert Symbol

Explains the meaning and use of the safety alert symbol for hazard recognition.

2 SAFETY

2.1 Safety Alert System

Explains the safety alert symbol, signal words, and hazard classification.

2.2 Graphical Symbols

Illustrates and explains various hazard and avoidance pictorial symbols used in the manual.

2.3 ANSI Safety Signs

Locates safety signs on the machine and references their descriptions.

2.3.1 ISO Safety Signs

Shows the placement of ISO safety signs on the machine with a key.

2.5 Personal Protection Equipment

Specifies required and recommended Personal Protective Equipment (PPE) for safe operation.

2.6 Hazard Zone

Defines the machine's hazard zone and precautions to maintain safe distances.

2.7 Operation

Outlines requirements for qualified operators and responsibilities for safe operation.

2.8 Stability

Provides guidelines for maintaining machine stability and avoiding rollovers, especially on inclines.

2.10 Fire Prevention

Details precautions and checks to minimize the risk of fire related to machine operation.

2.11 Crush and Burn Avoidance

Lists critical warnings and procedures to prevent crush and burn injuries.

2.12 Placing into Operation

Describes the pre-operation inspection and checks required before starting the machine.

2.13 Starting the Machine

Step-by-step guide for starting the machine's engine safely and correctly.

2.14 Jobsite Safety

Safety considerations specific to the work site, including electrical hazards.

2.18 Maintenance

General safety precautions and guidelines for performing maintenance tasks.

2.20 Hydraulic Hoses/Lines

Safety instructions and replacement criteria for hydraulic hoses and lines.

3 TECHNICAL DATA

4 MACHINE DESCRIPTION / CONTROLS

4.10 Emergency Exits

Guides on locating and using emergency exits for escaping the cab.

5 OPERATION

5.2 Pre-Operation Safety Checklist

A comprehensive checklist of safety inspections before operating the machine.

5.3 Starting Procedure

Step-by-step guide for starting the machine's engine safely and correctly.

5.12 Operation on Inclines

Safety precautions and techniques for operating the machine on inclines.

5.13 Shut Down Procedure

Steps for safely shutting down the machine after use.

5.14 Lift Arm Brace

Instructions for installing and removing the lift arm brace for safety.

6 TRANSPORTATION

7 MAINTENANCE

7.3 Maintenance Intervals

Lists periodic maintenance tasks and their recommended intervals.

7.6 Engine Oil Change

Procedures and recommendations for changing the engine oil and filter.

7.7 Hydraulic Oil Change

Instructions for changing the hydraulic oil and filter, including safety warnings.

7.8 Hydraulic Filter Change

Details the procedure for changing the hydraulic filters and related safety.

7.18 Chain Tension Adjustment

Detailed steps for adjusting the drive chain tension on the machine.

Related product manuals