Declaration of conformity concerning the design, construction and noise emissions of a leisure boat according to
directive 2013/53/EU.
Manufacturer: TerhiTec Oy, 21140 Rymättylä, Finland
Boat model / Certificate number CE category
TERHI SUNNY / TER003 D
TERHI 385 / TER002 D
TERHI 400 / BTER17 D
TERHI 440 / TER009 D
TERHI SAIMAN /BTER010 D
TERHI 445 /BTER018 C/D
TERHI NORDIC 6020 / TER005 C
TERHI 475 / BTER014 C
Essential requirements ISO-Standards, Other normative document/ methods
General requirements (2) EN ISO 8666:2002
Craft Identification Number CIN (2.1) EN ISO 10087:2006
Builder’s Plate(2.2) EN ISO 14945:2004
Protection from falling overboard and
means of reboarding (2.3) EN ISO 15085:2003 + A1:2009
Visibility from the main steering position (2.4) EN ISO 11591:2011
Owner’s manual (2.5) EN ISO 10240:2004
Structure (3.1) NBS 1990, RSG-guidelines
Stability and freeboard (3.2) EN ISO 12217-3:2013
Buoyancy and floatation (3.3) EN ISO 12217-3:2013
Openings in hull, deck and superstructure (3.4) EN ISO 9093-2:2002
Flooding (3.5) EN ISO 15083:2003
Manufacturer’s maximum recommended load (3.6) EN ISO 14946:2001
Anchoring, mooring and towing (3.9) EN ISO 15084:2003
Handling characteristics (4) EN ISO 11592:2001
Electrical systems (5.3)* EN ISO 10133:2012
Steering systems (5.4.1)* EN ISO 28848:1993+A1:2000
Fire protection (5.6.1)** EN ISO 9094-1:2003
* Applied only to models Terhi 445, Terhi Nordics 6020 and Terhi 475.
** Applied only to Terhi 475.
The stability, freeboard and buoyancy of the boat model have been assessed according to certification module Aa.
Notified body number 0609: International Marine Certification Institute
Address: Rue Abbé Cuypress 3
B-1040 Brussels, Belgium
Vantaa 1.10.2016
Oy Otto Brandt Ab Oy
Markku Hämäläinen, Group Chief Executive Ocer
7 Declaration of conformity
CIN:
FI-TRH
To Next Page
Loading...