TERMA ONE - Automatic Mode

32
Automac mode
Turn the knob to AUTO.
Time
Measured
temperature
Absence mode
Comfort or economy
manual mode
(up to program change)
Current seng
(e.g. comfort)
Day
Heang demand
mode
Forced operaon
(from 30 minutes to 4 hours)
Whenstarngup,thetemperaturemeasuredbythethermostatis
displayed (the
symbolappearsabovethe° C).
Pressthebuon
i to display the set-point temperature.
•Thetemperaturedisplaycanbereversed(CF02startupmenu):
– automacmode:set-pointtemperature,
– press
i: measured temperature.
•Ifyoudonotwanttouseaprogram,youcangotoconnuousEconomy
mode (knob turned to
),connuousComfortmode( )orconnuous
FrostProteconmode(
).