TERMA ONE - Absence Mode

33
Absence mode
This mode is used to set a temperature
(5to15° C)foraperiodthatcanbesetfrom
1 to 365 days.
Fromtheautomacmode(AUTO), press
the
buon.Thenumberofdaysashon
ando.
Press + or – to set the number of days.
Example:leavingon10January,returningon
19January,indicate9days.Automacopera-
onwillrestarton19Januaryat00.00h.
Press OKtoconrm.Thetemperatureashes
onando.Press+ or – to set the tempera-
ture.PressOKtoconrm.
To cancel the absence mode (e.g. when
returning early), press the Cbuonorturn
the knob.