TERMA ONE - Page 6

User manual — ONE
12. Ensure that the heater has been installed on a wall in
accordance with its installaon manual.
13. Please forward this instrucon manual to the end user.
Addionally, when installing (by yourself) the heat-
ing element in a radiator.
14. Ensure that the power cord does not touch the hot
parts of the heang element or radiator.
15. The heang element must be fully submerged in the
heang liquid during its operaon.
16. It is permied to test the heang element in the open
air (but never inside the empty radiator) for a period
not longer than 3 seconds.
Cauon! The heang element and radiator can heat
up to high temperatures. Handle with cauon, do not
touch the hot device.
17. Never turn the heating element on in an empty
radiator!
18. Before installing or removing the device, make sure it
is disconnected from the power source.
6