24 25
When cleaning and drying out the water container, follow these steps to take out the
tank and wipe it clean etc. more easily.
Step 2. Turn the knob to open position.
Step 3. Lift the water pump out of its
compartment and let it hang freely on
the hose.
Step 5. Re-installing the tank.
a. Thread the tank into position in the air cooler as it looks in Step 4.
b. Put the water pump back into position as in Step 2.
c. Turn the locking knob back so that it’s in the position shown in Step 1.
Step 4. Now you just need to lift out
the water container.
Step 1. Pull out the tank.
Open
Closed
The crossed-out wheeled bin symbol indicates that the item should be disposed
of separately from household waste. The item should be handed in for recycling in
accordance with local environmental regulations for waste disposal. By sepa
-
rating a marked item from household waste, you will help reduce the volume of
waste sent to incinerators or land-fill and minimize any potential negative impact
on human health and the environment.
TROUBLESHOOTING
Do not repair or disassemble the unit by yourself, unauthorized repair attempts
will invalidate the warranty and may cause bodily harm.
Issue
No power
Odour
emission
from unit
Strong
vibrations
and noise
Loud sound
Water leakage
Possible Reason
1. Power cord is unconnected
2. There is no power from socket
3. The power switch is not on.
1. New unit. When the unit is used for
the first time the air cooler motor may
produce and odour which will dissipate
within a week of use
1. air cooler is not used on a flat surface
2. air cooler may be damaged
1. The level in the water tank is low
2. There is no water in the tank
1. The water container is not correct
inserted
2. The water tank has been put back
so water splashed out.
Solution
1. Connect the power cord
2. Check socket is turned on
3. Turn the unit on
1. No action required
1. Place on a flat surface. May put
an anti-vibration mat underneath
2. If fan is damaged discontinue
use and contact service centre.
1. Fill the tank up to max before
using the COOL function
1. Remove the container and it dry
the area
insert it back gently
GB INSTRUCTION MANUAL GB INSTRUCTION MANUAL
To Next Page
Loading...