DMX 6Fire USB (English) 7
From opening the package to installation
Before connecting the DMX 6Fire USB with your computer, please note the details of your
computer's configuration. Also refer to the manual of your computer and other studio
peripherals for their settings.
The installation should run without any problems, especially in recent systems. If you are
experiencing difficulties all the same, please review carefully the relevant chapter in this
manual. If you are still having problems, please call our service hotline.
Scope of delivery
Start by making sure that the contents of the package are complete.
The DMX 6Fire USB package should contain the following items:
■ 1 DMX 6Fire USB (the hardware)
■ 1 network adapter
■ 1 adapter (6.3 mm -> 3.5 mm, stereo)
■ 1 adapter (6.3 mm -> 3.5 mm, mono)
■ 1 USB cable (1.8 m)
■ 1 installation CD (with detailed manual)
■ 1 Quick Start Guide
■ 1 customer service card
■ 1 registration card with the serial number
Please fill out and return the enclosed registration card to us at your earliest convenience
or register online at http://www.terratec.net/register.htm. This is important for support
and hotline services.
To Next Page
Loading...
Need help?
General
