6 MIDI Master USB (English)
Widows 98 SE installation
Insert the MIDIMASTER USB Drivers CD into your CD-ROM drive.
· The first time you switch the keyboard on, Windows displays a message indicating that
the hardware wizard has detected a new hardware component.
· Start searching for the correct driver by clicking “Next”.
· Then select the “Search for the best driver for your device” option and click “Next” again.
· On the next screen, enter the location of the driver as <CD>:\driver\pc\terratecUSBb and
confirm the location by clicking “Next”.
· The next screen tells you that the wizard is looking for the “TerraTec MIDIMASTER USB”
driver.
· Windows then displays a message that the driver has been installed. Confirm by clicking
“Finish”.
· The hardware wizard automatically opens again, because now the second driver has to be
installed. Repeat the above instructions to install the second driver. Afterwards, the
MIDIMASTER USB Keyboard will be available.
Windows ME installation
Insert the MIDIMASTER USB Drivers CD into your CD-ROM drive.
· The first time you switch the keyboard on, Windows displays a message indicating that
the hardware wizard has detected a new hardware component.
· The select the “Search for the best driver for your device” option and click “Next” again.
· Windows now searches for the driver automatically and installs the best driver for the
device.
· Windows then displays a message that the driver has been installed. Confirm by clicking
“Finish”.
· The hardware wizard automatically opens again, because now the second driver has to be
installed. Repeat the above instructions to install the second driver. Afterwards, the
MIDIMASTER USB Keyboard will be available.
To Next Page
Loading...