TERSUS BCPI13 - Page 34

- 34 -
Step 4 Step 3
Minute
Saved 1
st
phase ON/OFF timer Save Adjust First
4.4 The Phase 2、3 timer on/off setting:
The Phase 2、3 timer on/off setting:
Different operation: After finished 1
st
phase ON/OFF timer setting, please don’t press
key to save. While please press key to enter 2
nd
phase timer setting menu. Then
you can see , For the 2
nd
and 3
rd
phase ON/OFF timer setting method,
please follow up “1
st
phase ON/OFF timer setting” steps,(refer to chapter 4.3), After
finished 2
st
phase ON/OFF timer setting, please don’t press key to save. While
Saved ON timer data and then enter OFF timer setting
same as Step 2 and 3