THE UNIT MUST BE EARTHED PROPERLY BEFORE USAGE OR THE
When installing the heat pump in a small room, make sure it is well ventilated.
● Don't put fingers or objects into the air inlet outlet as the rotating fan could cause serious injuries.
● If you smell anything burning, turn off the manual power switch immediately, stop operation and
contact the after-sale service department. Continued abnormal operation may cause electric shock
fire.
● When the unit needs to be removed or re-installed, please ensure that the work is carried out by
qualified professionals. If the installation is not correct, it may cause unit operation failure, electric
shock, fire, hurt, leaking, etc.
● Please ensure that any repairs carried out by qualified professionals: failure to make proper repairs
could cause unit operation failure, electric shock, fire, hurt, leaking, etc..
● Do no install the unit near flammable sources, as any leakages could cause a fire.
● Make sure the base on which the unit is installed is strong enough to support it.
● Make sure a leakage protection switch is installed to prevent electric shock or fire.
To Next Page
Loading...
