Need help?Do you have a question about the TES TES-2730 and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| DC Voltage Range | 0.1mV to 1000V |
| AC Voltage Range | 0.1mV to 750V |
| Frequency Range | 10Hz to 10MHz |
| Diode Test | Yes |
| Continuity | Yes |
| Battery | 9V |
| Display | LCD, 3.5 digits |
| DC Current Range | 0.1μA to 10A |
| AC Current Range | 0.1µA to 10A |
| Temperature Range | -20°C to 1000°C |
Details environmental conditions, maintenance, operating principle, and display.
Details electrical specifications for DC and AC voltage measurements.
Steps to measure DC voltage using the multimeter.
Steps to measure AC voltage using the multimeter.
Procedure for measuring DC current with the multimeter.
Procedure for measuring AC current with the multimeter.
Steps for measuring resistance, including safety warnings.
Procedure for measuring capacitance using the multimeter.
Steps to measure frequency with the multimeter.
Procedure for measuring temperature using a K-type thermocouple.
Steps for performing diode tests and interpreting results.
Procedure for testing circuit continuity with the multimeter.
Instructions for checking and replacing the multimeter's battery.
Procedure for replacing the multimeter's fuse.
To Next Page
