TES TES-2730 - Capacitance Measurement; Frequency Measurement; Temperature Measurement

14
4-6 Capacitance Measurement
1). Set range switch to desired capacitor (F) position.
2). Insert the capacitor pins into capacitance connector for
measurement.
3). Read the capacitance on LCD.
4-7 Frequency Measurement
1). Set range switch to the Hz position.
2). Connect red test lead to “ V-
Ω
-Hz “ terminal and black test lead
to “ COM “ terminal.
3). Connect test prods of test Leads to the circuit to be measured.
4). Read the frequency value (Hz) displayed on LCD.
4-8 Temperature Measurement
1). Set range switch to the TEMP
℃
or
℉
range.
2). Connect the K-type thermocouple probe to the temperature
measurement jack.
3). Perform measurements by contacting the object being measured
with the probe sensor.