Safe Component Selection
1. Consider the total system design when selecting a component
to ensure safe, trouble-free performance.
2. The user is responsible for assuring all safety and warning
requirements of the application are met through his/her own
analysis and testing.
3. Tescom may suggest material for use with specific media upon
request. Suggestions are based on technical compatibility resources
through associations and manufacturers. Tescom does NOT guarantee
materials to be compatible with specific media — THIS IS THE
RESPONSIBILITY OF THE USER!
4. Component function, adequate ratings, proper installation, operation,
and maintenance are the responsibilities of the system user.
5. The user is responsible to be in accordance with all the necessary
mechanical and electrical codes required for installation and operation
of the system. These requirements include but not limited to all
explosion proof controllers.
6. The user is responsible for the selection of the proper model number
of the controller that would meet the application’s possible hazardous
environment or conditions.
Do not modify equipment or add attachments not
approved by the manufacturer.
ASSEMBLY/INSTALLATION/WIRING DRAWINGS &
BILLS OF MATERIALS
Drawings and parts lists for your product may be obtained by calling
the number below. Tescom will provide these by fax or mail. Your local
Tescom representative can provide additional assistance.
Call (800) 447-1250 or email to ecd@tescom.com for assembly/
installation/wiring drawings & bills of materials. Be sure to have your
complete model number ready.
11
To Next Page
Loading...
Need help?
General