EasyManua.ls Logo

Tesla 3 - Disabling the High Voltage System; Front Trunk First Responder Cut Loop

Tesla 3
37 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FRONT TRUNK FIRST RESPONDER CUT LOOP
The first responder loop is a low voltage harness. Cutting the first responder loop shuts down the high voltage system outside of the
high voltage battery and disables the SRS and airbag components. Refer to Cutting the Front Trunk First Responder Loop on page 13
for instructions on how to access and cut the first responder loop.
NOTE: The following image shows a Dual Motor vehicle. Vehicles without a front drive unit are similar.
Warning: Regardless of the disabling procedure you use, ALWAYS ASSUME THAT ALL HIGH VOLTAGE COMPONENTS ARE
ENERGIZED! Cutting, crushing, or touching high voltage components can result in serious injury or death.
FRONT TRUNK FIRST RESPONDER CUT LOOP
12

Other manuals for Tesla 3

Related product manuals