REINFORCEMENTS AND ULTRA HIGH STRENGTH STEEL
Model 3 is reinforced to protect occupants in a collision. Suitable tools must be used to cut or crush these areas. Reinforcements are
shown in teal below.
Warning: Always use appropriate tools, such as a hydraulic cutter, and always wear appropriate PPE when cutting Model 3. Failure
to follow these instructions can result in serious injury or death.
Warning: Regardless of the disabling procedure you use, ALWAYS ASSUME THAT ALL HIGH VOLTAGE COMPONENTS ARE
ENERGIZED! Cutting, crushing, or touching high voltage components can result in serious injury or death.
REINFORCEMENTS AND ULTRA HIGH STRENGTH STEEL
20
To Next Page
Loading...
