30
ENG
INTRODUCTION TO WI-FI FUNCTIONS
Download and install the control software
The AC system is equipped with remote control technology, with the WI-FI module inside the machine connected
to the display panel and the command to run the AC transmitted. The AC system is in constant connection with
a wireless router or access point attached to the Internet. Mobile terminals such as smart phones and tablet
computers, on which special control software are installed and WI-FI modules successfully configured locally, can
be used as remote controllers once they are connected to the Internet.
Once the control software is installed, enter
the “Scanning Interface”(for downloading the
Welcome Page). There are two types of log-ons
contained in the Scanning Interface (See Fig.2):
The control software can be downloaded and installed as follows.
For Android
For IOS
Figure 1 Figure 2
1. For mobile terminals such as smart phones and tablet ( Android 4.1 and iOS 6.0 or above only), search and
download “AC Freedom” from Google Play or App store on and install it on your system.
2. You may also use your mobile terminal (Android 4.1 and iOS 6.0 or above only) to scan the “QR code” (see
Fig.1) with a third party scan tool, which will automatically direct you to the download interface of AC Freedom
for you to download and install the software.
To Next Page
Loading...
Need help?
General
