EasyManuals Logo

Tesla Model 3 User Manual

Tesla Model 3
234 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #174 background imageLoading...
Page #174 background image
Checking and Cleaning Wiper
Blades
Periodically clean the edge of the wiper blades and
check the rubber for cracks, splits, and roughness. If
damaged, replace the blade immediately to prevent
damage to the glass and improve visibility.
Contaminants on the windshield, or on the wiper blades,
can reduce the eectiveness of the wipers.
Contaminants include ice, wax spray from car washes,
washer fluid with bug and/or water repellent, bird
droppings, tree sap, and other organic substances.
Follow these guidelines for cleaning:
Clean the windshield and wiper blades using washer
fluid, isopropyl (rubbing) alcohol, or non-abrasive
glass cleaner approved for use on automotive glass
and rubber. Inappropriate products can cause
damage or smears, and create glare on the
windshield.
Lift the wiper arm a short distance away from the
windshield, just far enough to access the wiper blade.
Do not lift a wiper arm beyond its intended position.
If the wipers remain ineective after cleaning, replace
the wiper blades.
Replacing Wiper Blades
For optimum performance, replace the wiper blades at
least once a year.
NOTE: Only install replacement blades that are identical
to the original blades. Using inappropriate blades can
damage the wiper system and windshield.
To replace the wiper blades:
1.
Shift into Park and turn o the wipers.
2.
Touch Controls > Service > Wiper Service Mode > ON
to move the wipers to the service position.
3.
Lift the wiper arm a short distance away from the
windshield, just far enough to access the wiper blade.
CAUTION:
Wiper blades do not lock into a lifted
position. Do not lift a wiper arm beyond its
intended position.
4.
Place a towel between the wiper arm and windshield
to avoid scratching or cracking the windshield.
5. Hold the wiper arm and press the locking tab while
sliding the blade down the arm.
6.
Align the new wiper blade on the wiper arm and slide
it toward the end of the wiper arm until it locks into
place.
7.
Turn Wiper Service Mode o to return the wipers to
their normal position.
Cleaning Washer Jets
If a windshield washer becomes blocked, use a thin
strand of wire to clear any blockages from the nozzles.
WARNING:
Do not operate the washers while
cleaning Model 3. Windshield washer fluid can
irritate eyes and skin. Read and observe the
washer fluid manufacturer’s instructions.
Wiper Blades and Washer Jets
172 MODEL 3 OWNER'S MANUAL

Table of Contents

Other manuals for Tesla Model 3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tesla Model 3 and is the answer not in the manual?

Tesla Model 3 Specifications

General IconGeneral
BrandTesla
ModelModel 3
CategoryAutomobile
LanguageEnglish

Related product manuals