NOTE: Applying external 12V power to these
terminals only releases the hood latches. You cannot
charge the 12V battery using these terminals.
6. Turn on the external power supply (refer to the
manufacturer’s instructions). The hood latches are
immediately released and you can now open the
hood to access the front trunk area.
7. Disconnect both cables, beginning with the black
negative (-) cable.
8.
If pulling the vehicle onto a flatbed truck, do not
replace the tow eye cover yet. If necessary, replace
the tow eye cover by inserting the wires into the tow
eye opening and aligning the tow eye cover into
position and turning it into place.
Front Trunk
20 MODEL 3 OWNER'S MANUAL
To Next Page
Loading...
