OPENING THE HOOD
Model S does not have a traditional internal combustion engine. Therefore, the area that would normally house the engine is used as
additional storage space. Tesla calls this area the “Front Trunk”.
To open the hood, use one of the following methods:
• Touch the associated OPEN button on the touchscreen (Controls > Quick Controls) for the front trunk.
• Double-click the front trunk button on the key.
• Pull the release cables located in the front wheel arch liners. First, release the cover in the RH front wheel well and pull the strap to
release the primary latch. Then, release the cover in the LH front wheel well and pull the strap to release the secondary latch.
OPENING THE HOOD
Opening the Vehicle 27
To Next Page
Loading...
