to a key, first ensure you are using your
desired driver profile. Touch the driver profile
icon at the top of the Controls screen. Follow
the onscreen instructions to add a phone key,
key card, or key fob (see Adding and
Removing Keys on page 14). When finished,
touch the driver icon to link the key to the
desired driver
profile. The name of the driver
profile appears under the key to show that it
is linked.
NOTE: Model X supports up to 10 driver
profiles. You can link multiple keys to a driver
profile, but you cannot link multiple driver
profiles to a single key.
Valet Mode
When Model X is in Valet mode, the following
restrictions apply:
•
Speed is limited to 70 mph (113 km/h).
•
Maximum acceleration and power are
limited.
•
Front trunk and glovebox are locked.
•
Home and Work locations are not
available in the navigation system.
•
Voice commands are disabled.
•
Autopilot convenience features are
disabled.
• The Allow Mobile Access setting cannot
be changed
•
HomeLink (if available in your market
region) is not accessible.
• Driver Profiles are not accessible.
• Wi-Fi and Bluetooth are disabled. When
Model X is in Valet mode, you cannot pair
new Bluetooth devices or view or delete
existing paired devices. However, if a
Bluetooth-paired device or a known Wi-Fi
network is within range,
Model X connects
to it.
NOTE: Model X does not automatically shift
when in Valet Mode.
Starting Valet Mode
With Model X in Park, touch the driver profile
icon at the top of the Controls screen, then
touch Valet Mode.
The
first time you enter Valet mode, the
touchscreen prompts you to create a 4-digit
PIN you will use to cancel Valet mode.
When Valet mode is active, the instrument
panel displays the word Valet and the Valet
mode driver profile displays on the
touchscreen.
You can also use the mobile app to start and
cancel Valet mode (provided
Model X is in
Park). When using the mobile app, you do not
need to enter a PIN because you are already
required to log into the app using your Tesla
Account credentials.
NOTE: If the PIN to Drive setting is enabled
(see PIN to Drive on page 185), you must
enter the driving PIN before you can
define or
enter a Valet PIN. Once in Valet mode,
Model X can be driven without the valet
needing to enter the driving PIN.
NOTE: The PIN to Drive setting is not
available when Valet mode is active.
If you forget your valet PIN, reset it from
inside Model X by entering your Tesla
Account credentials (which also cancels Valet
mode). You can also reset your PIN using the
mobile app.
WARNING: Do not use Valet mode
when towing a trailer. The torque
limitations of Valet mode can make it
dicult for Model X to pull a trailer up
a hill.
Canceling Valet Mode
With Model X in Park, touch the Valet Mode
driver profile icon at the top of the Controls
screen, and enter your 4-digit PIN.
When you cancel Valet mode, all settings
associated with the most recently used driver
profile and climate control settings are
restored, and all features are available.
NOTE: You do not need to enter a PIN to
cancel Valet mode from the mobile app.
Driver Profiles
56 MODEL X Owner's Manual
To Next Page
Loading...
