EMERGENCY RESPONSE GUIDE
3
OVERVIEW OF HIGH VOLTAGE COMPONENTS
1. Battery
2. DC-DC converter
3. High voltage cabling (colored orange)
4. 10 kW on-board master charger
5. Drive unit
6. Charge port
7. OPTIONAL: 10 kW on-board slave
charger
WARNING: Regardless of the disabling procedure you use, ALWAYS ASSUME THAT ALL HIGH VOLTAGE COMPONENTS ARE ENERGIZED! Cutting, crushing or touching
high voltage components can result in serious injury or death.
HIGH VOLTAGE COMPONENTS
HIGH VOLTAGE COMPONENTS
WARNING: The SRS control unit has a backup power supply with a discharge time of approximately ten seconds.
WARNING: After deactivation, the high voltage circuit requires two minutes to deplete.
To Next Page
Loading...
