2. Allow the seat belt to retract, and remove
all slack in the seat belt while firmly
pushing the child safety seat into the
Model S seat.
3. If the seat belt retained child safety seat
has an upper tether, attach it to the back
of the seat (see Attaching Upper Tether
Straps on page 25).
Installing LATCH Child Seats
Lower LATCH anchor positions are provided
in the second-row seats and are located
between the seat's back rest and rear cushion.
The exact location of each anchor is identified
by a child safety seat identification button,
illustrated below. The button is located on the
seat back, directly above its associated
anchor. Some Model S vehicles have two
LATCH seating positions (outboard seating
positions only) whereas others have three.
On vehicles with the center LATCH position,
you can install two LATCH seats adjacent to
each other only if you install one of the seats
on the right (passenger side) and the other in
the center, as illustrated below. To seat three
children, use a seat belt retained seat in the
center position.
On vehicles without the center LATCH
position, install LATCH seats in the outboard
seating positions only and always use a seat
belt retained seat in the center position.
Seating and Safety Restraints
24 Model S Owner's Manual
To Next Page
Loading...
