31
ENG
ERROR CODES
If there is a malfunction, the dishwasher will display error codes to identify these:
WARNING!
• If overflow occurs, turn off the main water supply before calling a service.
• If there is water in the base pan because of an overfill or small leak, the water should be removed before
restarting the dishwasher.
TECHNICAL INFORMATION
Codes Meanings
Possible
E1 Longer inlet time.
Faucet is not opened, or water intake is restricted,
or water pressure is too low.
E3 Not reaching required.
Malfunction of heating element.
E4 Overflow.
Some element of dishwasher leaks.
Height (H) 845 mm
Width (W) 448 mm
Depth (D1) 600 mm (with the door closed)
Depth (D2) 1175 mm (with the door opened 90°)
To Next Page
Loading...
