TESTO 115i User Manual

5 First steps
9
5 First steps
5.1. Switching on/off
testo 549i
5.1.1. Switching on
1. Pull the film out of the battery compartment.
2. Press the button on your Smart Probe.
- The Smart Probe switches on.
5.1.2. Switching off
1. Press and hold the button on your Smart Probe.
- The Smart Probe switches off.
5.2. Establishing Bluetooth
®
connection
You need a tablet or smartphone with the testo Smart Probes App
already installed on it to be able to establish a Bluetooth connection.
You can get the App for iOS instruments in the App Store or for
Android instruments in the Play Store.
Compatibility:
• requires iOS 8.3 or later/Android 4.3 or later
• requires Bluetooth 4.0
• Tested with the following smartphones/tablets:
www.testo-international.com/de/smartprobesmanuals/
✓ The testo App Smart Probe is installed on your terminal device
and ready for use.
1. Press the button on the Smart Probe.
- The Smart Probe switches on.
- The LED flashes yellow while connecting via Bluetooth and
then flashes green once the connection is established.
- The connection between the Smart Probe and your mobile
terminal device is established.

TESTO 115i Specifications

General

Type	Clamp Thermometer
Connectivity	Bluetooth
Compatibility	Testo Smart Probes App
Dimensions	183 x 90 x 30 mm
Resolution	0.1 °C
Power Supply	3 x AAA batteries
Battery Life	150 hours
Bluetooth Range	100 m
Operating Temperature	-20 to +50 °C (-4 to +122 °F)
Storage Temperature	-20 to +60 °C