Need help?Do you have a question about the TESTO 316-1 and is the answer not in the manual?
General| Type | Refrigerant Leak Detector |
|---|---|
| Product type | Refrigerant leak detector |
| Sensor Type | Heated Diode |
| Display | LCD |
| Operating Temperature | 0 to 50 °C |
| Weight | 0.3 kg |
| Refrigerant detection | Yes |
| Battery type | 2 x 1.5 V AA |
| Battery life | Approximately 20 hours |
| Storage temperature | -20 to 60 °C |
| Power Supply | Battery |
| Response time | < 1 second |
| Resolution | 1 g/year |
General safety instructions for operating the gas leak detector properly and avoiding hazards.
Guidelines for disposing of rechargeable batteries and the product at its end of life.
Details the testo 316-1's function as a gas leak detector and lists detectable gases.
Identifies and describes the main components and controls of the testo 316-1 gas leak detector.
Step-by-step instructions for opening the battery compartment and inserting batteries.
Procedure for powering the instrument on, including warm-up and auto-off features.
Overview of the instrument's keys, display, and bar indicators for operation.
Steps for selecting, opening, and adjusting various functions and settings on the instrument.
Procedure to verify the sensor's functionality using a low-concentration test gas.
Detailed instructions for performing gas leak detection and interpreting results.
Guidance on recognizing the need for battery replacement and the procedure.
Instructions for cleaning the exterior housing of the instrument.
Steps to clean the sensor head to ensure optimal performance and accuracy.
Common issues, their causes, and recommended solutions for instrument problems.
Explains error codes displayed by the instrument and their meanings.
Procedure to reset the instrument's firmware to resolve operational problems.
List of optional accessories and replacement parts for the device.
To Next Page
