EasyManua.ls Logo

TESTO 300 XL-I User Manual

TESTO 300 XL-I
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Instruction manual en
testo 300 M-I and XL-I

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the TESTO 300 XL-I and is the answer not in the manual?

TESTO 300 XL-I Specifications

General IconGeneral
Product TypeFlue Gas Analyzer
Resolution (CO)1 ppm
Resolution (NO)1 ppm
Resolution (SO2)1 ppm
Resolution (Differential pressure)0.01 hPa
Resolution (Temperature)0.1 °C
Protection classIP40
Measurement parametersO2, CO, NO, NO2, SO2, H2S, CxHy, differential pressure, flow, temperature, draft
NO measurement range0 to 3, 000 ppm
NO2 measurement range0 to 500 ppm NO2
SO2 measurement range0 to 5, 000 ppm SO2
Accuracy (CO)±5 ppm or ±5% of measured value
Accuracy (NO)±5 ppm or ±5% of measured value
Accuracy (NO2)±5 ppm or ±5% of measured value
Accuracy (SO2)±5 ppm or ±5% of measured value
Accuracy (H2S)±5 ppm or ±5% of measured value
Accuracy (O2)±0.2 vol.%
Accuracy (Differential pressure)±0.03 hPa or ±3% of measured value
Resolution (CO2)0.1 vol.%
Resolution (O2)0.1 vol.%
Storage conditions-20 to +50 °C
InterfacesBluetooth, USB

Summary

Initial Operation and Setup

Safety and Warnings

Essential safety guidelines and potential hazards to avoid during initial use.

Analyser Overview and Operation

Understanding the analyser's components, display, and basic controls for operation.

Data Input and Navigation

Methods for entering numerical/text data and navigating analyser menus.

Power and Charging

Details on device power, battery charging, and power supply options.

Performing Measurements

Temperature Measurement

How to measure flue gas and ambient air temperatures.

Gas Composition Analysis

Measuring O2, CO2, CO, NO, and SO2 levels in flue gas.

Specialized Measurements

Performing advanced measurements like differential pressure, velocity, and dew point.

Data Management: Saving and Printing

Procedures for saving and printing measurement results.

Reference and Settings

Memory Management Operations

Storing, retrieving, and managing measurement data using designators.

Fuel Settings and Selection

Configuring fuel types and associated factors for accurate calculations.

System Settings Configuration

Adjusting display, units, date/time, printer, and other system parameters.

Maintenance and Troubleshooting

Routine Maintenance Tasks

Cleaning condensate traps, flue gas probes, and changing filters.

Component Replacement Procedures

Replacing measuring cells, batteries, and other instrument parts.

Error Message Resolution

Identifying and resolving common error messages and analyser issues.

Technical Data and Ordering

Technical Specifications Overview

Detailed specifications for analyser performance, ranges, and accuracy.

Accessories and Ordering Information

List of available accessories, probes, and part numbers for purchase.

Related product manuals